|
|
|
National Stock Number:
5305-00-345-1587
Federal Supply Class:
5305
National Item Identification Number:
003451587
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AN4H10 | 77445 | RTX CORPORATION | | LS15265V3-4 | 06710 | VALLEY-TODECO, INC. | | LS15265V3-4 | 06725 | SPS TECHNOLOGIES, LLC | | LS15265V3-4 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LS15265V3-4 | 27624 | SPS TECHNOLOGIES LLC | | LS15265V3-4 | 56878 | SPS TECHNOLOGIES, LLC | | LS15265V3-4 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FASTENER LENGTH | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM | | HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | THREAD CLASS | 3A | | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
|
|