|
|
|
National Stock Number:
5305-00-345-2352
Federal Supply Class:
5305
National Item Identification Number:
003452352
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 11907-10L12 | 59563 | REID PRODUCTS INC. | | HT4024L10-12 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4024L10-12 | 17446 | HUCK INTERNATIONAL, INC | | HT4024L10-12 | 50392 | SPS TECHNOLOGIES INC | | HT4024L10-12 | 56878 | SPS TECHNOLOGIES, LLC | | HT4024L10-12 | 73197 | HI-SHEAR CORPORATION | | ST3M455-10L12 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M455-10L12 | 0PTK6 | SPS TECHNOLOGIES INC | | ST3M455-10L12 | 17446 | HUCK INTERNATIONAL, INC | | ST3M455-10L12 | 76301 | THE BOEING COMPANY | | HT4024L10-12 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4024L10-12 | 97928 | HUCK INTL INC | | ST3M455-10L12 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | HT4024L10-12 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.688 INCHES MINIMUM AND 1.718 INCHES MAXIMUM | | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | HEAD DIAMETER | 0.848 INCHES MINIMUM AND 0.925 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | ST2-455 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.928 INCHES MINIMUM AND 0.978 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 18 |
|
|