|
|
|
National Stock Number:
5305-00-347-7847
Federal Supply Class:
5305
National Item Identification Number:
003477847
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AN4H20 | 77445 | RTX CORPORATION | | LS15265V3-7 | 06710 | VALLEY-TODECO, INC. | | LS15265V3-7 | 06725 | SPS TECHNOLOGIES, LLC | | LS15265V3-7 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LS15265V3-7 | 27624 | SPS TECHNOLOGIES LLC | | LS15265V3-7 | 56878 | SPS TECHNOLOGIES, LLC | | LS15265V3-7 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LS15265V3-7 | 93907 | TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS | | LS15265V3-7 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| FASTENER LENGTH | 0.699 INCHES MINIMUM AND 0.729 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.1881 INCHES MINIMUM AND 0.1887 INCHES MAXIMUM | | HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | HEAD STYLE | PAN | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD CLASS | 3A | | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|