|
|
|
National Stock Number:
5305-00-364-9543
Federal Supply Class:
5305
National Item Identification Number:
003649543
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 10125240 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 11905-3L6 | 59563 | REID PRODUCTS INC. | | CHT4025-3-6 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | CHT4025-3-6 | 17419 | DEUTSCH CO THE | | CHT4025-3-6 | 80539 | SPS TECHNOLOGIES, LLC | | CHT4025-3-6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4025L3-6 | 06725 | SPS TECHNOLOGIES, LLC | | HT4025L3-6 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4025L3-6 | 17446 | HUCK INTERNATIONAL, INC | | HT4025L3-6 | 27624 | SPS TECHNOLOGIES LLC | | CYRB77-2 | 50294 | NEW HAMPSHIRE BALL BEARINGS INC | | HT4025L3-6 | 56878 | SPS TECHNOLOGIES, LLC | | HT4025L3-6 | 73197 | HI-SHEAR CORPORATION | | HT4025L3-6 | 80539 | SPS TECHNOLOGIES, LLC | | ST3M454-3L6 | 007R1 | TWIST TITE MFG, INC | | ST3M454-3L6 | 06710 | VALLEY-TODECO, INC. | | ST3M454-3L6 | 0PTK6 | SPS TECHNOLOGIES INC | | ST3M454-3L6 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | ST3M454-3L6 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | ST3M454-3L6 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M454-3L6 | 73197 | HI-SHEAR CORPORATION | | ST3M454-3L6 | 76301 | THE BOEING COMPANY | | ST3M454-3L6 | 80539 | SPS TECHNOLOGIES, LLC | | HT4025L3-6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4025L3-6 | 97928 | HUCK INTL INC | | HT4025L3-6 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | HT4025L3-6 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | ST3M454-3L6 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | HT4025L3-6 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | HT4025L3-6 | R1120 | SATAIR A/S | | WC4025L-3-6 | 60516 | WEST COAST AEROSPACE, INC. |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.766 INCHES MINIMUM AND 0.796 INCHES MAXIMUM | | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|