|
|
|
National Stock Number:
5305-00-462-5149
Federal Supply Class:
5305
National Item Identification Number:
004625149
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1156V14 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.366 INCHES MINIMUM AND | | 0.416 INCHES MAXIMUM | | FASTENER LENGTH | 1.251 INCHES MINIMUM AND | | 1.281 INCHES MAXIMUM | | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.704 INCHES MINIMUM AND | | 0.762 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.865 INCHES MINIMUM AND | | 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS |
|
|