| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.410 INCHES NOMINAL |
| HEAD DIAMETER | 0.231 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MATERIAL ACCOMMODATED THICKNESS | 0.075 INCHES MINIMUM AND 0.089 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303MA OR STEEL COMP 303PB OR STEEL COMP 303SE FASTENER |
| MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 PRIMARY WASHER |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| SURFACE TREATMENT | PASSIVATE FASTENER |
| SURFACE TREATMENT | PASSIVATE PRIMARY WASHER |
| SURFACE TREATMENT | ANODIZE STAND-OFF |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |