|
|
|
National Stock Number:
5305-00-582-8863
Federal Supply Class:
5305
National Item Identification Number:
005828863
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 51983 | 27682 | HATHAWAY CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.125 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.202 INCHES NOMINAL | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FASTENER LENGTH | 0.500 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.138 INCHES NOMINAL | | HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | COPPER ALLOY OVERALL | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SECOND DIAMETER FROM HEAD | 0.100 INCHES NOMINAL | | SURFACE TREATMENT | NICKEL OVERALL | | THREAD CLASS | 2A | | THREAD LENGTH | 0.298 INCHES MINIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|