|
|
|
National Stock Number:
5305-00-591-9231
Federal Supply Class:
5305
National Item Identification Number:
005919231
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 421566 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | P180785 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
|
Techincal Specification:
| FASTENER LENGTH | 0.750 INCHES MAXIMUM | | HEAD HEIGHT | 0.067 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | HEAD DIAMETER | 0.169 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | HEAD STYLE | ROUND | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 0.099 INCHES | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 1S STYLE | | SCREW MATERIAL | STEEL COMP 1020 | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM OR ZINC | | TEST DATA DOCUMENT | 81348-FFS92 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.750 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 48 | | THREAD SERIES DESIGNATOR | UNC |
|
|