5305-00-606-9611, SCREW,CLOSE TOLERANCE

5996-00-606-9612 AMPLIFIER,ELECTRONIC CONTROL

National Stock Number:
5305-00-606-9611

Federal Supply Class:
5305

National Item Identification Number:
006069611

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

51B581-3-16H	0JRC1	NORTHROP GRUMMAN TECHNICAL SERVICES, INC.
51B581-3-16H	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.143 INCHES MINIMUM AND 1.190 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH	1.260 INCHES MINIMUM AND 1.307 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES NOMINAL FIRST HOLE
SPECIFICATION/STANDARD DATA	76823-51B581 MANUFACTURERS STANDARD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD LENGTH	0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial