|
|
|
National Stock Number:
5305-00-734-1581
Federal Supply Class:
5305
National Item Identification Number:
007341581
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 003-007861-017 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 5305007341581 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 61402060416 | 89944 | ELBITAMERICA, INC. | | MS35250-24 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51960-17 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD DIAMETER | 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 80 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 | | SCREW SURFACE TREATMENT | PASSIVATE | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.208 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 48 | | THREAD SERIES DESIGNATOR | UNF |
|
|