|
|
|
National Stock Number:
5305-00-786-4028
Federal Supply Class:
5305
National Item Identification Number:
007864028
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 11532 | 84760 | STANADYNE CORPORATION | | 304790R1 | 0SAT8 | KOMATSU AMERICA CORP. | | 304790R1 | 29510 | KOMATSU AMERICAN INTL CO | | 304790R1 | 31007 | NAVISTAR INTL CORP | | 410-5 | 84760 | STANADYNE CORPORATION | | 304790R1 | 92679 | NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/ |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.466 INCHES MINIMUM AND | | 0.528 INCHES MAXIMUM | | FASTENER LENGTH | 0.843 INCHES MINIMUM AND | | 0.875 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.310 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM | | HEAD HEIGHT | 0.305 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | HOLE CONFIGURATION STYLE | ROUND | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 2 | | HOLE DIAMETER | 0.068 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.185 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | SECOND DIAMETER FROM HEAD | 0.120 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.212 INCHES MINIMUM AND | | 0.232 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.357 INCHES MINIMUM AND | | 0.367 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 84760 | | DESIGN CONTROL REFERENCE | 11532 |
|
|