5305-00-813-1573, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-813-1573

Federal Supply Class:
5305

National Item Identification Number:
008131573

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1209-16D	04348	LAWRENCE ENGINEERING AND SUPPLY INC
NAS1209-16D	07851	NOR-CAL SUPPLY CO
NAS1209-16D	08938	AIR INDUSTRIES CO INC
NAS1209-16D	30889	ERIKS SOUTHWEST INC DBA MONTCLAIR ENTERPRISES
NAS1209-16D	50568	APCOM INC
NAS1209-16D	56878	SPS TECHNOLOGIES, LLC
NAS1209-16D	71563	COLLINS ENGINEERING CORP
NAS1209-16D	73197	HI-SHEAR CORPORATION
NAS1209-16D	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1209-16D	80539	SPS TECHNOLOGIES, LLC
NAS1209-16D	82172	DURHAM AIRCRAFT SERVICE INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.362 INCHES MINIMUM AND 1.412 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.496 INCHES MINIMUM AND 1.526 INCHES MAXIMUM
GRIP LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	1.087 INCHES MINIMUM AND 1.145 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS1209 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.486 INCHES MINIMUM AND 0.536 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial