5305-00-815-9965, SCREW,EXTERNALLY RELIEVED BODY

5935-00-815-9990 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5305-00-815-9965

Federal Supply Class:
5305

National Item Identification Number:
008159965

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

AS91687

11976

CHICAGO PNEUMATIC TOOL CO

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	3.844 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.500 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	4.344 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.159 INCHES MINIMUM AND 0.162 INCHES MAXIMUM
HARDNESS RATING	30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT	0.141 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
HEAD STYLE	FILLISTER
HOLE CONFIGURATION STYLE	ROUND
HOLE DIAMETER	0.047 INCHES NOMINAL
HOLE QUANTITY	1
HOLE TYPE	DRILLED
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4640 OVERALL
MINIMUM YIELD STRENGTH	130000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
SECOND DIAMETER FROM HEAD	0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SURFACE TREATMENT	CADMIUM OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.500 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial