5905-00-816-0065 RESISTOR,FIXED,WIRE WOUND,NONIND Index 5905-00-816-0086 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5305-00-816-0077

Federal Supply Class:
5305

National Item Identification Number:
008160077

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
548-2702-00313499ROCKWELL COLLINS, INC.


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER1.453 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.203 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER1.491 INCHES MINIMUM AND 1.539 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER0.231 INCHES NOMINAL
FASTENER LENGTH2.003 INCHES MINIMUM AND 2.027 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.164 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
INTERNAL DRIVE STYLESLOT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 CONDA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 430 OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES
SECOND DIAMETER FROM HEAD0.116 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
THIRD DIAMETER FROM HEAD0.164 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2A
THREAD LENGTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us