|
|
|
National Stock Number:
5305-00-842-7546
Federal Supply Class:
5305
National Item Identification Number:
008427546
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 3M263-5-11 | 17446 | HUCK INTERNATIONAL, INC | | 3M263-5-11 | 56878 | SPS TECHNOLOGIES, LLC | | 3M263-5-11 | 73197 | HI-SHEAR CORPORATION | | 3M263-5-11 | 76301 | THE BOEING COMPANY | | 3M263-5-11 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | 66117H5-11 | 50392 | SPS TECHNOLOGIES INC | | HS2623-5Z11 | 17446 | HUCK INTERNATIONAL, INC | | HS2623-5Z11 | 97928 | HUCK INTL INC | | HT195-5-11 | 73197 | HI-SHEAR CORPORATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.139 INCHES MINIMUM AND 1.186 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.441 INCHES MINIMUM AND 0.508 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|