|
|
|
National Stock Number:
5305-00-849-9046
Federal Supply Class:
5305
National Item Identification Number:
008499046
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 5305008499046 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5305008499046 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 810089 | 80045 | L3HARRIS CINCINNATI ELECTRONICS CORPORATION | | SMC413531-11 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.171 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.297 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.100 INCHES MINIMUM AND 0.105 INCHES MAXIMUM | | HEAD DIAMETER | 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HEAD HEIGHT | 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.126 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNF |
|