|
|
|
National Stock Number:
5305-00-850-0132
Federal Supply Class:
5305
National Item Identification Number:
008500132
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 2562-42539 | 14418 | UNISYS CORP DEFENSE SYSTEMS C S D FIELD ENGINEERING | | N2562-42539-2 | 14418 | UNISYS CORP DEFENSE SYSTEMS C S D FIELD ENGINEERING | | N2562-42539-2 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.688 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 1.000 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM | | HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HEAD HEIGHT | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | HOLE DIAMETER | 0.047 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | THREAD CLASS | 2A | | THREAD LENGTH | 0.312 INCHES MINIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 |
|