|
|
|
National Stock Number:
5305-00-853-3849
Federal Supply Class:
5305
National Item Identification Number:
008533849
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 20047 | 86090 | EATON CORPORATION |
|
Techincal Specification:
| COUNTERSINK ANGLE | 140.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.940 INCHES NOMINAL | | HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEAD HEIGHT | 0.093 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | INTERNAL DRIVE STYLE | SLOT | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SCREW MATERIAL | ALUMINUM ALLOY 2024 | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | ANODIZE | | SPECIAL FEATURES | HOLE DRILLED ON LONGITUDINAL AXIS FROM HEAD END 0.0625 IN. MIN,0.0635 IN. MAX DIA BY 0.750 IN. DEEP | | THREAD CLASS | 2A | | THREAD LENGTH | 0.290 INCHES MINIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|