5305-00-855-2009, SCREW,EXTERNALLY RELIEVED BODY

5310-00-855-2007 WASHER,FLAT

5306-00-855-2010 BOLT,MACHINE

National Stock Number:
5305-00-855-2009

Federal Supply Class:
5305

National Item Identification Number:
008552009

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

5800332-1900-001	C0426	HENSOLDT SENSORS GMBH
751000	80249	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER	4.285 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.380 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	2.999 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.409 INCHES NOMINAL
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	2.970 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	4.785 INCHES NOMINAL
FIFTH DIAMETER FROM HEAD	0.190 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.190 INCHES NOMINAL
FOURTH DIAMETER FROM HEAD	0.147 INCHES NOMINAL
HEAD HEIGHT	0.125 INCHES NOMINAL
HEAD STYLE	HEXAGON
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SECOND DIAMETER FROM HEAD	0.147 INCHES NOMINAL
WIDTH BETWEEN FLATS	0.438 INCHES NOMINAL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THIRD DIAMETER FROM HEAD	0.190 INCHES NOMINAL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.500 INCHES MINIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial