|
|
|
National Stock Number:
5305-00-857-4335
Federal Supply Class:
5305
National Item Identification Number:
008574335
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 837142 | 80045 | L3HARRIS CINCINNATI ELECTRONICS CORPORATION | | SMB416201 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.250 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.531 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.098 INCHES NOMINAL | | HEAD DIAMETER | 0.217 INCHES NOMINAL | | HEAD HEIGHT | 0.093 INCHES NOMINAL | | HEAD STYLE | FILLISTER | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-634 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 6TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 7TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 8TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 9TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 10TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 11TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 12TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 13TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 14TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 15TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 16TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 17TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 18TH MATERIAL RESPONSE OR QQ-S-634 FED SPEC 19TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1008 OR STEEL OR STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OVERALL | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.281 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|