|
|
|
National Stock Number:
5305-00-862-2005
Federal Supply Class:
5305
National Item Identification Number:
008622005
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 546-8183-003 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.407 INCHES MINIMUM AND | | 0.438 INCHES MAXIMUM | | FASTENER LENGTH | 1.169 INCHES NOMINAL | | MATERIAL | STEEL COMP 430 OVERALL | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | HEAD DIAMETER | 0.235 INCHES MINIMUM AND | | 0.245 INCHES MAXIMUM | | HEAD HEIGHT | 0.144 INCHES NOMINAL | | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FIRST DIAMETER FROM HEAD | 0.115 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | SECOND DIAMETER FROM HEAD | 0.139 INCHES MINIMUM AND | | 0.145 INCHES MAXIMUM | | THIRD DIAMETER FROM HEAD | 0.224 INCHES MINIMUM AND | | 0.244 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.200 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.669 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 0.731 INCHES NOMINAL | | SPECIAL FEATURES | FURNISHED WITH WASHER ON THREADED END | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|