5305-00-927-6417, SCREW,CLOSE TOLERANCE

3680-00-927-6411 SPRAY CAN,LIQUID,MOLDER'S

5895-00-927-6418 COVER,ELECTRONIC COMMUNICATION E

National Stock Number:
5305-00-927-6417

Federal Supply Class:
5305

National Item Identification Number:
009276417

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1124C6H

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.576 INCHES MINIMUM AND 0.706 INCHES MAXIMUM
GRIP LENGTH	0.375 INCHES NOMINAL
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
HARDNESS RATING	248.0 BRINELL STANDARD MINIMUM AND 321.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD DIAMETER	0.357 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT	0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
HOLE CONFIGURATION STYLE	ROUND
HOLE DIAMETER	0.064 INCHES NOMINAL
HOLE QUANTITY	2
HOLE TYPE	DRILLED
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS1124 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	A0110-006 FSCM 43999 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD LENGTH	0.316 INCHES MINIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial