|
|
|
National Stock Number:
5305-00-927-8151
Federal Supply Class:
5305
National Item Identification Number:
009278151
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 30333 | 07148 | UNITED TECHNOLOGIES CORP HAMILTON SUNDSTRAND CORP | | 30333 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.310 INCHES MINIMUM | | FASTENER LENGTH | 0.625 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.344 INCHES NOMINAL | | HEAD HEIGHT | 0.150 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SLOT | | HOLE CONFIGURATION STYLE | ROUND | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.047 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 | | FIRST DIAMETER FROM HEAD | 0.265 INCHES NOMINAL | | SECOND DIAMETER FROM HEAD | 0.154 INCHES NOMINAL | | THIRD DIAMETER FROM HEAD | 0.265 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.101 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.210 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 0.250 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 07148 | | DESIGN CONTROL REFERENCE | 30333 |
|