|
|
|
National Stock Number:
5305-00-928-9635
Federal Supply Class:
5305
National Item Identification Number:
009289635
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 5305009289635 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5305009289635 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | A1C82-5-15 | 06725 | SPS TECHNOLOGIES, LLC | | AIC82-5-15 | 06725 | SPS TECHNOLOGIES, LLC | | C082-5-16 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | C082-5-16 | 81755 | LOCKHEED MARTIN CORPORATION | | SFT22-5A16 | 56878 | SPS TECHNOLOGIES, LLC | | SFT22-5A16 | 80539 | SPS TECHNOLOGIES, LLC | | VS2545T5F16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.351 INCHES NOMINAL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HEAD DIAMETER | 0.630 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | TORQUE SET | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL COMP H11 | | SCREW SURFACE TREATMENT | CADMIUM | | THREAD CLASS | 3A | | THREAD LENGTH | 0.351 INCHES MINIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|