|
|
|
National Stock Number:
5305-00-929-9214
Federal Supply Class:
5305
National Item Identification Number:
009299214
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 7823864-1-04-38 | 88277 | THE BOEING COMPANY | | AS101-04-38 | 84256 | AVIBANK MFG., INC. |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.222 INCHES MINIMUM AND 1.296 INCHES MAXIMUM SECOND HOLE | | FASTENER LENGTH | 2.663 INCHES MINIMUM AND 2.690 INCHES MAXIMUM | | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | | GRIP LENGTH | 2.375 INCHES MINIMUM AND 2.395 INCHES MAXIMUM | | HEAD HEIGHT | 0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | HEAD STYLE | CROWNED HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | LOCKING FEATURE | DETENT BALL GRIP | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM SECOND HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FS251,FSCM 88277 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SPECIAL FEATURES | TWO SPRING LOADED BALLS,IN SHANK AS SELF RETAINING FEATURE | | THREAD CLASS | 3A | | THREAD LENGTH | 0.268 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNF | | WIDTH BETWEEN FLATS | 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
|
|