|
|
|
National Stock Number:
5305-00-936-4025
Federal Supply Class:
5305
National Item Identification Number:
009364025
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 0N089257-2 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.130 INCHES MINIMUM AND | | 0.170 INCHES MAXIMUM | | FASTENER LENGTH | 0.390 INCHES MINIMUM AND | | 0.410 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.205 INCHES MINIMUM AND | | 0.219 INCHES MAXIMUM | | HEAD HEIGHT | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.070 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM |
|
|