|
|
|
National Stock Number:
5305-00-941-3618
Federal Supply Class:
5305
National Item Identification Number:
009413618
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 000355 | 70650 | WALBRO CORP AUTOMOTIVE PRODUCTS GROUP | | 193982 | 24617 | GENERAL MOTORS CORP | | 4253 | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 4124 | 23382 | FWD SEAGRAVE HOLDINGS LP | | 193982 | 7X677 | GENERAL MOTORS LLC | | 1X7 | 83120 | PRESSED METALS OF AMERICA INC | | 47307 | 13841 | TIFFIN PARTS, L.L.C. | | 4253A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 4253A | 28265 | HERCULES ENGINE CO INC | | 4253 | 28265 | HERCULES ENGINE CO INC | | 5HS620 | 45152 | OSHKOSH CORP | | 50-1A14 | 60528 | TRAILMOBILE INC SUB OF THE PULLMAN CO | | 44326 | 64104 | DRESSER, LLC | | 5305009413618 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | PUAMA1-37 | 05643 | BARBER-GREENE CO | | PUAMA1-37 | 0MKW7 | MINNPAR, LLC | | 7-115-140450 | 12361 | GROVE U.S. LLC | | Q1754 | 29930 | INTERNATIONAL HARVESTER CO AGRICULTURAL EQUIPMENT DIV | | Q1754 | 31007 | NAVISTAR INTL CORP | | A5078X | 65282 | WHITE MOTOR CORP | | MS51095-303 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM51095 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS51095-303 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.062 INCHES NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH | | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.500 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 20 |
|
|