| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 2.285 INCHES MINIMUM AND 2.315 INCHES MAXIMUM |
| GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| LOCKING FEATURE | STRIP THREADS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| MATERIAL | PLASTIC LOCKING FEATURE |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 FASTENER |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SPECIFICATION/STANDARD DATA | 80205-NAS1164 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT | CADMIUM AND CHROMATE FASTENER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 28 |