4730-00-950-0710 ELBOW,TUBE Index 5305-00-950-0720 SCREW,MACHINE

National Stock Number:
5305-00-950-0718

Federal Supply Class:
5305

National Item Identification Number:
009500718

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS334C3180205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.141 INCHES MINIMUM AND 3.188 INCHES MAXIMUM
GRIP DIAMETER0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH2.678 INCHES MINIMUM AND 2.698 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEHEXAGON
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
SINGLE SHEAR STRENGTH4650 POUNDS PER SQUARE INCH
WIDTH ACROSS FLATS0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES GRIP
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us