|
|
|
National Stock Number:
5305-00-957-7815
Federal Supply Class:
5305
National Item Identification Number:
009577815
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 10114736 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 210672-61 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5305PL0142349 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305009577815 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | AN507-440-6 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5305009577815 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS24693-S4 | 07ZN5 | NORTH-EAST FASTENERS CORP. | | MS24693-S4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24693-S4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | AN507-440R6 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | C10236-0106-000 1 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | MS24693-4 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | HEAD DIAMETER | 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | THREAD CLASS | 2A | | THREAD LENGTH | 0.245 INCHES MINIMUM AND 0.295 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNC |
|
|