| FASTENER LENGTH | 0.477 INCHES MINIMUM AND 0.481 INCHES MAXIMUM |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| HEAD DIAMETER | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| HEAD HEIGHT | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.047 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI 302 OR SAE 30302 FED STD SINGLE MATERIAL RESPONSE OR FED STD 66,AISI 303 OR SAE 30303 FED STD SINGLE MATERIAL RESPONSE OR FED STD 66,AISI 304 OR SAE 30304 FED STD SINGLE MATERIAL RESPONSE OR FED STD 66,COMP 305 FED STD SINGLE MATERIAL RESPONSE OR FED STD 66,AISI 314 OR SAE 30314 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| NOMINAL THREAD DIAMETER | 0.164 INCHES |
| WIDTH ACROSS FLATS | 0.141 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | +4601,FSCM 91547 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.477 INCHES MINIMUM AND 0.481 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNC |