|
|
|
National Stock Number:
5305-01-030-7636
Federal Supply Class:
5305
National Item Identification Number:
010307636
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT4049-4D10 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4049-4D10 | 17446 | HUCK INTERNATIONAL, INC | | HT4049-4D10 | 56878 | SPS TECHNOLOGIES, LLC | | HT4049-4D10 | 73197 | HI-SHEAR CORPORATION | | HT4049-4D10 | 80539 | SPS TECHNOLOGIES, LLC | | HT4049-4D10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | ST3M714-4D10 | 0ZC92 | HEARTLAND PRECISION FASTENERS INC | | ST3M714-4D10 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | ST3M714-4D10 | 27624 | SPS TECHNOLOGIES LLC | | ST3M714-4D10 | 56878 | SPS TECHNOLOGIES, LLC | | ST3M714-4D10 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M714-4D10 | 59563 | REID PRODUCTS INC. | | HT4049-4D10 | 97928 | HUCK INTL INC | | HT4049-4D10 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M714-4D10 | 60516 | WEST COAST AEROSPACE, INC. | | ST3M714-4D10 | 61809 | JOSLYN CLARK CONTROLS INC | | ST3M714-4D10 | 76301 | THE BOEING COMPANY | | ST3M714-4D10 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.803 INCHES MINIMUM AND 0.843 INCHES MAXIMUM FIRST HOLE | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|