|
|
|
National Stock Number:
5305-01-047-6252
Federal Supply Class:
5305
National Item Identification Number:
010476252
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 51B332-3 | 06725 | SPS TECHNOLOGIES, LLC | | 51B332-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 51B332-3 | 27624 | SPS TECHNOLOGIES LLC | | 51B332-3 | 73197 | HI-SHEAR CORPORATION | | 51B332-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 51B332-3 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 51B332-3 | 80539 | SPS TECHNOLOGIES, LLC | | 51B332-3 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 51B332-3 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.448 INCHES MINIMUM AND 0.495 INCHES MAXIMUM | | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.282 INCHES MINIMUM AND 0.337 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR -1L-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR -1L-S-5000 MIL SPEC 3RD MATERIAL RESPONSE OR -1L-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR -1L-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SPECIFICATION/STANDARD DATA | 86823-51B332 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.250 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 32 |
|
|