5305-01-048-6098, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-048-6098

Federal Supply Class:
5305

National Item Identification Number:
010486098

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

51B581-7-14H	06725	SPS TECHNOLOGIES, LLC
51B581-7-14H	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
51B581-7-14H	0JRC1	NORTHROP GRUMMAN TECHNICAL SERVICES, INC.
51B581-7-14H	27624	SPS TECHNOLOGIES LLC
51B581-7-14H	73197	HI-SHEAR CORPORATION
51B581-7-14H	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION
51B581-7-14H	79U29	NORTHROP GRUMMAN SYSTEMS CORPORATION
51B581-7-14H	80539	SPS TECHNOLOGIES, LLC
51B581-7-14H	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
51B581-7-14H	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.204 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	1.312 INCHES MINIMUM AND 1.359 INCHES MAXIMUM
GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP DIAMETER	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.662 INCHES MINIMUM AND 0.668 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	76823-51B58 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT	CADMIUM AND CHROMATE OR CADMIUM OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.427 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial