|
|
|
National Stock Number:
5305-01-053-5801
Federal Supply Class:
5305
National Item Identification Number:
010535801
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121574-6-14 | 80539 | SPS TECHNOLOGIES, LLC | | 121754-6-14 | 56878 | SPS TECHNOLOGIES, LLC | | 121754-6-14 | 80539 | SPS TECHNOLOGIES, LLC | | 5305PL0759585 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1653612 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1913438 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AIC9535-6-14 | 06725 | SPS TECHNOLOGIES, LLC | | C9535-6-14 | 06725 | SPS TECHNOLOGIES, LLC | | VT1696-6-14 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF1198-6-14 | 27264 | MOLEX INCORPORATED DBA USE CAGE CODE 1UX99 FOR CATALOGING DIV MOLEX CONNECTOR CORPORATION | | PBF1198-6-14 | 27624 | SPS TECHNOLOGIES LLC | | C9535-6-14 | 81755 | LOCKHEED MARTIN CORPORATION | | VT1696-6-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| FASTENER LENGTH | 1.445 INCHES NOMINAL | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.555 INCHES MINIMUM AND 0.585 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|