|
|
|
National Stock Number:
5305-01-054-6244
Federal Supply Class:
5305
National Item Identification Number:
010546244
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121754-7-14 | 80539 | SPS TECHNOLOGIES, LLC | | 5305PL0759599 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AIC9535-7-14 | 06725 | SPS TECHNOLOGIES, LLC | | 5305PL1653577 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1759009 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5305PL1934829 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | C9535-7-14 | 27624 | SPS TECHNOLOGIES LLC | | PF1198-7-14 | 27624 | SPS TECHNOLOGIES LLC | | C9535-7-14 | 81755 | LOCKHEED MARTIN CORPORATION | | VT1696-7-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| FASTENER LENGTH | 1.558 INCHES NOMINAL | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | HEAD HEIGHT | 0.112 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD DIAMETER | 0.605 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.438 INCHES | | SPECIAL FEATURES | CONICAL BEARING SURFACE OF HEAD 99.0 DEGREE TO 101.0 DEGREE INCLUDED ANGLE 0.077 IN. LONG | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.668 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|