|
|
|
National Stock Number:
5305-01-069-6957
Federal Supply Class:
5305
National Item Identification Number:
010696957
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 91925-8 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 91925-8 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | DPYR7900-4-A-2 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1115-4-1-2 | 58794 | FASTENER TECHNOLOGY CORP | | CS6006P-8 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | DPYR7900-4-A-2 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.110 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | FASTENER LENGTH | 0.400 INCHES MINIMUM AND | | 0.420 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | ANODIZE STAND-OFF | | PASSIVATE FASTENER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.323 INCHES MINIMUM AND | | 0.333 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.062 INCHES NOMINAL |
|
|