5305-01-077-5794, SCREW,EXTERNALLY RELIEVED BODY

5905-01-077-5793 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5305-01-077-5794

Federal Supply Class:
5305

National Item Identification Number:
010775794

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

2080407

10001

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.109 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.171 INCHES MINIMUM AND 0.191 INCHES MAXIMUM
ASKEWED HEAD ANGLE	90.0 DEGREES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.475 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.175 INCHES MINIMUM AND 0.176 INCHES MAXIMUM
HEAD DIAMETER	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT	0.092 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
HEAD STYLE	FLUSH
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OR STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER	0.138 INCHES
SECOND DIAMETER FROM HEAD	0.086 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
SPECIAL FEATURES	0.030 IN. BY 45 DEGREE CRAMFER ON OUTER BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD LENGTH	0.285 INCHES NOMINAL
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial