5305-01-078-5065, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-078-5065

Federal Supply Class:
5305

National Item Identification Number:
010785065

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

B1821BH050C150C	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
B1821BH050C150C	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS18154-114L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE	HEXAGON
LOCKING FEATURE	PATCH OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429, GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE LOCKING FEATURE
MATERIAL	STEEL FASTENER
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE AND 8 GRADE
WIDTH BETWEEN FLATS	0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTM B633, TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	ZINC AND CHROMATE FASTENER
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD LENGTH	1.250 INCHES MINIMUM AND 1.443 INCHES MAXIMUM
THREAD QUANTITY PER INCH	13
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial