| FASTENER LENGTH | 0.595 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| HARDNESS RATING | 80.0 ROCKWELL B MINIMUM OVERALL |
| HEAD DIAMETER | 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| HEAD HEIGHT | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OR 66 FED STD 2ND MATERIAL RESPONSE OR 66 FED STD 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OR ASTM A493 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SPECIFICATION/STANDARD DATA | 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| WIDTH ACROSS FLATS | 0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.512 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| THREAD SERIES DESIGNATOR | UNRF |