|
|
|
National Stock Number:
5305-01-124-3635
Federal Supply Class:
5305
National Item Identification Number:
011243635
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 10115115 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 965368-165C | 82577 | RAYTHEON COMPANY | | DXH7900-10-C-3 | 0HDW7 | HUCK INTERNATIONAL, INC. | | DXH7900-10-C-3 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.189 INCHES MINIMUM AND | | 0.199 INCHES MAXIMUM | | FASTENER LENGTH | 0.655 INCHES MINIMUM AND | | 0.685 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-423,COMP FS302,COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING | | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF | | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS5734 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS5735 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.346 INCHES MINIMUM AND | | 0.376 INCHES MAXIMUM | | HEAD HEIGHT | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | MATERIAL ACCOMMODATED THICKNESS | 0.126 INCHES MINIMUM AND | | 0.187 INCHES MAXIMUM |
|
|