5305-01-127-5346, SCREW ASSEMBLY,PANEL

5411-01-127-5347 SHELTER,NONEXPANDABLE,LIGHTWEIGH

National Stock Number:
5305-01-127-5346

Federal Supply Class:
5305

National Item Identification Number:
011275346

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

5033474-010	57946	US ARMY COMBAT SURVEILLANCE AND TARGET ACQUISITION LABORATORY
CA28017-9P	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
CA28102-3-9P	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
CA28102-3-9P	D0680	FAIRCHILD FASTENERS EUROPE CAMLOC GMBH

Techincal Specification:

FASTENER LENGTH	1.195 INCHES NOMINAL
HEAD DIAMETER	0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD HEIGHT	0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD STYLE	FILLISTER
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS	0.062 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL	STEEL COMP 302 PRIMARY WASHER
MATERIAL	STEEL COMP 302 SPRING
MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L FASTENER
MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SECONDARY WASHER
MATERIAL	STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFF
NOMINAL THREAD DIAMETER	0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial