4320-01-129-9033 SEAL ASSEMBLY,SHAFT,SPRING LOADE Index 5995-01-129-9035 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5305-01-129-9034

Federal Supply Class:
5305

National Item Identification Number:
011299034

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.


Manufacturer Information:
10115219A486GNIMIKKEISTOKESKUS NCB FINLAND
965875-122C82577RAYTHEON COMPANY
CPRL7900-6-B-3.50HDW7HUCK INTERNATIONAL, INC.
FT1171-12258794FASTENER TECHNOLOGY CORP
CS1026P06-3.5-258998FASTENER INNOVATION TECHNOLOGY, INC.
CPRL7900-6-B-3.597928HUCK INTL INC


Techincal Specification:
FASTENER LENGTH0.583 INCHES MINIMUM AND 0.613 INCHES MAXIMUM
HEAD DIAMETER0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD HEIGHT0.077 INCHES MINIMUM AND 0.107 INCHES MAXIMUM
HEAD STYLEPAN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A-493 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIALSTEEL COMP 302 FASTENER
MATERIALSTEEL COMP 301 PRIMARY WASHER
MATERIALSTEEL COMP 304 STAND-OFF
MINIMUM TENSILE STRENGTH112000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.138 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENTPASSIVATE FASTENER
SURFACE TREATMENTPASSIVATE PRIMARY WASHER
SURFACE TREATMENTPASSIVATE STAND-OFF
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
THREAD CLASS3A
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us