|
|
|
National Stock Number:
5305-01-135-4149
Federal Supply Class:
5305
National Item Identification Number:
011354149
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 16600391-010 | 17446 | HUCK INTERNATIONAL, INC | | 16600391-010 | 28009 | SYPRIS ELECTRONICS, LLC | | CA11020-06-2-13P | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA1114-2-13P | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA114-2-13P | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| FASTENER LENGTH | 0.797 INCHES MINIMUM AND 0.827 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | MATERIAL | STEEL COMP 302 FASTENER OR STEEL COMP 303 FASTENER OR STEEL COMP 303SE FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 304L FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 309 FASTENER OR STEEL COMP 310 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 316L FASTENER OR STEEL COMP 317 FASTENER OR STEEL COMP 321 FASTENER OR STEEL COMP 347 FASTENER | | MATERIAL | STEEL COMP 302 STAND-OFF OR STEEL COMP 303 STAND-OFF OR STEEL COMP 303SE STAND-OFF OR STEEL COMP 304 STAND-OFF OR STEEL COMP 304L STAND-OFF OR STEEL COMP 305 STAND-OFF OR STEEL COMP 309 STAND-OFF OR STEEL COMP 310 STAND-OFF OR STEEL COMP 316 STAND-OFF OR STEEL COMP 316L STAND-OFF OR STEEL COMP 317 STAND-OFF OR STEEL COMP 321 STAND-OFF OR STEEL COMP 347 STAND-OFF | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE FASTENER | | SURFACE TREATMENT | PASSIVATE STAND-OFF | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|