5305-01-135-5511, SCREW ASSEMBLY,PANEL

5910-01-135-5512 CAPACITOR,FIXED,GLASS DIELECTRIC

National Stock Number:
5305-01-135-5511

Federal Supply Class:
5305

National Item Identification Number:
011355511

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

B4009147

56996

DEPARTMENT OF THE ARMY HQ UNITED STATES ARMY COMMUNICATIONS RESEARCH AND DEVELOPMENT COMMAND

Techincal Specification:

FASTENER LENGTH	0.784 INCHES MINIMUM AND 0.814 INCHES MAXIMUM
HEAD DIAMETER	0.325 INCHES NOMINAL
HEAD HEIGHT	0.240 INCHES NOMINAL
HEAD STYLE	FLAT CHAMFER
MATERIAL ACCOMMODATED THICKNESS	0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL	STEEL COMP 303 FASTENER
MATERIAL	STEEL COMP 303 HEAD
MATERIAL	STEEL COMP 303 PRIMARY WASHER
MATERIAL	STEEL COMP 303 STAND-OFF
NOMINAL THREAD DIAMETER	0.164 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 TY4 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 TY4 FED SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 TY4 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 TY4 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT	PASSIVATE FASTENER
SURFACE TREATMENT	PASSIVATE HEAD
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE STAND-OFF
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.155 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial