|
|
|
National Stock Number:
5305-01-140-3047
Federal Supply Class:
5305
National Item Identification Number:
011403047
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 10115408 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 7370004-2 | 19133 | MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS AEROSPACE OPNS WEST | | 7370004-2 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.190 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.312 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.078 INCHES NOMINAL | | HEAD HEIGHT | 0.049 INCHES NOMINAL | | HEAD DIAMETER | 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 480 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.122 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNC |
|
|