5305-01-144-6258, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-144-6258

Federal Supply Class:
5305

National Item Identification Number:
011446258

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

708-.875-SS-12

51506

ACCURATE SCREW MACHINE CORP

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.453 INCHES MINIMUM AND 0.453 INCHES MINIMUM AND 0.485 INCHES MAXIMUM0.485 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	11
FASTENER LENGTH	0.859 INCHES MINIMUM AND 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM0.891 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.125 INCHES MINIMUM AND 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM0.135 INCHES MAXIMUM
HEAD DIAMETER	0.370 INCHES MINIMUM AND 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM0.380 INCHES MAXIMUM
HEAD HEIGHT	0.422 INCHES MINIMUM AND 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM0.454 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOTSLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA582 ASSN STD SINGLE MATERIAL RESPONSE OVERALLASTMA582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OR STEEL COMP 303 OR STEEL COMP 303SE OVERALLSTEEL COMP 303SE OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALLQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALLPASSIVATE OVERALL
THREAD CLASS	2A2A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THREAD LENGTH	0.240 INCHES MINIMUM AND 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH	3232
THREAD SERIES DESIGNATOR	UNFUNF

Click here to Register for Free 30-day Trial