|
|
|
National Stock Number:
5305-01-145-1196
Federal Supply Class:
5305
National Item Identification Number:
011451196
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 11500928 | 24617 | GENERAL MOTORS CORP | | 423-520 | 72741 | DORMAN PRODUCTS, INC. | | DIN933STM10X1-5X20 | 05824 | AEROJET ROCKETDYNE INC | | DIN933 M10X1.5X20-8.8 | 21969 | ZELENDA MACHINE AND TOOLS CORP | | DIN EN ISO 4017 | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) | | ISO 4017-M10X1.5X20-8.8 | I9008 | INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) | | M10-1-5-20 DIN 933 ST | 05824 | AEROJET ROCKETDYNE INC | | M10-1.5-20 DIN9 33ST | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| FASTENER LENGTH | 20.00 MILLIMETERS NOMINAL | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 7.0 MILLIMETERS NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | DIN933 8.8 FSCM 21969 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL PROPERTY CLASS 8.8 OVERALL | | MINIMUM TENSILE STRENGTH | 128000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 142000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | WIDTH BETWEEN FLATS | 17.0 MILLIMETERS NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 17.0 MILLIMETERS MINIMUM AND 20.0 MILLIMETERS MAXIMUM | | THREAD PITCH IN MILLIMETERS | 1.5 | | THREAD SERIES DESIGNATOR | M |
|
|