|
|
|
National Stock Number:
5305-01-147-6735
Federal Supply Class:
5305
National Item Identification Number:
011476735
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS90726-273 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS90726-273 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 2.812 INCHES MINIMUM AND 3.000 INCHES MAXIMUM | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL | STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL | | MINIMUM TENSILE STRENGTH | 105000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 1.250 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 5 GRADE | | WIDTH BETWEEN FLATS | 1.812 INCHES MINIMUM AND 1.875 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 2.522 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 12 | | THREAD SERIES DESIGNATOR | UNF |
|
|