5305-01-147-8711, SCREW,EXTERNALLY RELIEVED BODY

5305-01-147-8712 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-147-8711

Federal Supply Class:
5305

National Item Identification Number:
011478711

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

3168813-0027	10001	NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
4050	04729	UNICORP.
4050-M07-F09	04729	UNICORP.
PL92784ITEM038	20950	ESPEY MFG AND ELECTRONICS CORP

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	1.245 INCHES MINIMUM AND 1.265 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.750 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER	0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
HEAD HEIGHT	0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIAL FEATURES	STRAIGHT KNURL ON SIDE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD LENGTH	0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial